LanSchool Software

Access Points

Aerohive®AP230 802.11ac Wireless Access Point

Product Specifications

    • Radio Specifications—802.11a

      • 5.150–5.950 GHz Operating Frequency
      • Orthogonal Frequency Division Multiplexing (OFDM) Modulation
      • Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
    • Radio Specifications—802.11b

      • 2.4–2.5GHz Operating Frequency
      • Direct-Sequence Spread-Spectrum (DSSS) Modulation
      • Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback
    • Radio Specifications—802.11g

      • 2.4–2.5 GHz Operating Frequency
      • Orthogonal Frequency Division Multiplexing (OFDM) Modulation
      • 20 dBm (100 mW) Transmit Power
      • Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
    • Radio Specifications—802.11n

      • 2.4–2.5 GHz & 5.150–5.950 GHz Operating Frequency
      • 802.11n Modulation
      • Rates (Mbps): MCS0–MCS23 (6.5Mbps - 450Mbps)
      • 3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio
      • HT20 (both 2.4GHz and HT40 High-Throughput (HT) Support)
      • A-MPDU and A-MSDU Frame Aggregation
    • Radio Specifications—802.11ac

      • 5.150–5.950 GHz Operating Frequency
      • 802.11ac Modulation (256-QAM)
      • Rates (Mbps): MCS0–MCS9 (6.5Mbps - 1300Mbps), NSS = 1-3.
      • 3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio
      • VHT20/VHT40/VHT80 support
    • Mounting

      • Desktop
      • Wall Mount included as part of AP
      • Built-in slot for Kensington type locks
      • Ceiling and Wall Mount locking accessory included with AP
      • Ceiling Tile flush 15/16” included as part of AP
      • Ceiling Tile Recessed 15/16”, 3/8”, 9/16” sold as an accessory
      • Ceiling Tile flush 3/8”, 9/16” sold as an accessory
      • Suspend Mount sold as an accessory
      • Plenum Mount sold as an accessory
    • Antennas

      • 3x Integrated single band, 2.4-2.5 GHz Omni-directional antennas, 6.0 dBi peak gain
      • 3x Integrated single band, 5.1-5.8 GHz Omni-directional antennas, 6.0 dBi peak gain
    • Interfaces

      • 2x autosensing 10/100/1000 Base-T Ethernet Ports
      • Dual Ethernet ports with backhaul capabilities
      • Link Aggregation supported via Ether channel (link aggregation)
      • 1x Serial RJ45 port (bits per second: 9600, data bits: 8, parity: none, stop bits: 1, flow control: none)
      • USB 2.0 port
      • 1x Reset Pinhole
    • Physical

      • WxHxD: 7.25” x 7.25” by 1 7/8” tall (plus .25” for the mounting hardware) – so 2.12” (5.4 cm) high total
      • Weight: 1.6 lbs (.73 kilograms)
    • Environmental

      • Operating: 0 to 40°C, Storage: -40 to +70°C, Humidity: 95% Environmental Compliance
      • UL 2043
    • Power Options (sold separately)

      • 802.3af (minimum required) and/or 802.3at Power over Ethernet PoE Injector
      • 12v DC external power adapter
      • Aerohive switch products
    • Power Specification

      • AC/DC power adapter: – Input: 100–240 VAC – Output: 12v/2.0A
      • PoE nominal input voltages: 48V, 0.35A, (802.3af) – 48V, 0.625A (802.3at)
      • RJ-45 power input pins: Wires 4,5,7,8 or 1,2,3,6

See Related Products